Steampunk Ideas

Today for tech when started on coming up with ideas we could do for our steampunk creations. I came up with make a Bracelet and Goggles. Unfortunately this was our last class with Mr Grundy but I loved it. Enjoy!

Steampunk

This is my research I did on Steampunk. This is my first class at tech for term 2 and I am loving it. Learning about Steampunk is super cool. We will be preparing to make our own Steampunk creations at home. Enjoy!

Maze Game

At Technology, we have been in cooking and wood as you can see from my previous blogs. Now for the rest of this term and some of next term we are moving to robotics. We were told the we were going to make a self driven robotic car. First we started to do some coding on mazes. It was really fun but also challenging. 

Technology Wood

This Blog Will Be Recording The Steps On How I Make A M&M Dispenser. 

------------------------------

Recording:
Step 1: I used a pencil, ruler and a piece of wood to make a full size working drawing of my M&M Dispenser because if I make a mistake I could rub it out but on wood I can't uncut.

Step 2: I used a pencil and a ruler to copy the measurements drawing  of my M&M Dispenser onto              the piece of wood 

Step 3: I marked a square line at 90° across using a Tri-square.

Step 4: I cut off the first piece of wood using a Backed-Saw.

Step 5: I then marked out the joint using the piece of wood I cut off, pencil, Tri-square                     and a Marking gauge. 

Step 6: Then I used a Backed-saw to cut the marked lines. 

Step 7: I used a Mallet, Vice and a Chisel to chisel out the wood.

Step 8: I then took out the piece wood from the vice then used a sandpaper smooth                         uneven and rough joints. I would also ask Mr Grundy to even out the joint with                        his Machine. I this step with another piece of wood  

Step 9: I then mark out the hole for where the M&M's will come out .

Step 10: Next I glue the pieces of wood into the joints and wait for 30 minutes.

Step 11: After 30 minutes, Mr Grundy created to hole to where the M&M's will come out.

Step 12: Using a piece of wood we made a hole on the side.

Step 13: Then I got the sandpaper and smooth all the rough and chipped parts.

Step 14: Mr Grundy then cut a circle piece to cover the bottom hole using a Machine.

Step 15: Also using the Machine, Mr Grundy cut a flat piece of wood to place on the sides.

Step 16: We assembled it using Glue.

Step 17: After it had set, we then put a glass piece using Pan Head Screws 

Step 18: Then I cut 2 80 cm flat pieces as handles for the middle piece.

Step 19: Mr Grundy then glues one of the flat pieces to on of the end using Glue.

Step 20: Using Mr Grundy's machine, he cut out the lid and a flat piece of wood for the inside.

Step 21: Using The Glue Bottle, We glued together the pieces and left it for 20 minutes

Step 22: Last bit was to test it. It worked perfectly fine.

Technology Wood

Chicken Spring Roll

Cottage Pie

Potato Salad with Ham+Egg

Roast Chicken With Indian Sauce

Making Chocolate Muffins Again

Chop Suey!

Chocolate Muffins

Macaroni & Cheese

Making Fettuccine Carbonara

Technology Cabbage And Corn Sliver Beef

Technology Hotcakes

Today At Technology We Made Hotcakes. Hotcakes Are Pancakes With Chocolate Chips In Them. They Were Super Easy To Make And Super Fun